2000mW Laser Engraver DIY Engraving Machine Cutter Logo Printer 8x8cm
- List PriceUS$139.90piece
- Sale PriceUS$139.90piece
- ShippingFree Shipping
|Material||ABS(Acrylonitrile Butadiene Styrene plastic)|
|Input Voltage||100-240V 50-60Hz|
|Power cord's length||116cm|
|USB cable's length||120cm|
|Plug type||US Plug|
|Applicable range||Plane surface|
|Supporting systems||Windows XP/7/8/10(Windows Vista / XP,Ma c,Unix,Linux are not supported)|
|Supporting image format||JPG / GIF / BMP / DIB / ICO / CUR /PNG|
|Can carve||wood, plastic, leather, etc.|
|Can not carve||Metal glass crystal etc.|
* Made of hight quality ABS(Acrylonitrile Butadiene Styrene plastic),durable ,not easy aging.
* With cooling fan,can cooling the machine temperature,extend the service life.
* Laser focus knob,through rotation can adjust focus point to determine the precision.
* Comes with protective lenses, do not have to operate with glasses, more convenient.
1: Connect the laser engraver with computer.
2: Install the software.(see more details in the manual)
3: Open the software.
4: Choose or import a picture, edit it. Make sure the pic is in the mid of the engrave area.
5: Start engrave.
*Please connect the engraver to computer before install the software, or the engraver will be unable to function correctly.
1. The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine
for industrial use.
2. Do not use the laser head to point at human & livestock and their eyes.
3. Laser has power. Skin exposure to laser is strictly prohibited.
4. The caving machine should not be stopped while working,it will cause a damage.
5. This product is not suitable for kids under age of 14.
6. Software only support Windows system.
7. Do not fall or make any collision to the product.
8. The shell with laser cutting technology,sharp edge,please pick up and down gently to prevent scratches.
9. Metal, glass, crystal and transparent or translucent stuff are can not be engraved.
10. The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored
due to manual measurement. Your kindly understanding would be appreciated.
11. You might need to temporarily shut down the antivirus software before downloading the software. Otherwise some files in the
software would be mistaken for virus and deleted by antivirus software.
12. Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break.
1 x Laser Engraver
1 x USB Disk
1 x Screw Driver
4 x Screws
4 x Screw Caps
1 x Power Cord
1 x USB Cable
2 x Wooden Board
2 x Paper Board
1 x Manual